190E 2.3 (201.028) L4-2.3L (102.985) (1987)
/l4-2.3l_(102.985)/Page-1609002.png)
Disassembly and Assembly
1.
Remove snap ring (11).
Installation Note
After installing, press snap ring upwards on the entire circumference using a screwdriver.
2.
Tilt externally-toothed disc carrier (1) and remove disc set. Examine internally-toothed discs for signs of scorching and wear (specified
thickness 2 mm).
Installation Note
Pay attention to the sequence of the clutch discs.