190E 2.3 (201.028) L4-2.3L (102.985) (1987)
Shim ring (17) and O-ring (12)
Remove, install.
Freewheel inner ring (13)
Remove and install counter-clockwise.
Take note of installation instruction.
Cylinder rollers (16) and detent cage (14) with pressure springs (15)
Remove, install and check.
Freewheel outer ring (24)
Remove, install and check.
Thrust washer (18) and O-ring (20)
check.
Note:
Transmission 722.417 is fitted with only one lubricating pressure ring (95) and has an additional bearing point in the front cover (arrow).
1 Input Shaft
30 Stator Shaft
31 Bronze Bush
95 Lubricating pressure ring
Arrow Additional bearing point
Special Tool
Special Tool
Auxiliary tool (part)
Retaning plates (16 pieces) ........................................................................................................................................................................ 126 277 00 73
Note:
Lubricate bearing points and sliding surfaces when assembling.
Disassembly and Assembly