190E 2.3 (201.028) L4-2.3L (102.985) (1987)
7. Take off radial bearing (5) and axial bearing (6).
8. Pull out output shaft (8).
9. Take off axial bearing (9) and pull out sunwheel (10).
Installation Note:
Place sunwheel (10) into freewheel and turn. The freewheel must lock in the direction of arrow; then place axial bearing (9) onto sunwheel.
10. Turn connection carrier (7) and remove snap ring (21).
Installation Note:
Press snap ring into the groove using a screwdriver.
11. Lift internally-toothed disc carrier K2 (19) with freewheel out of connection carrier (7).