190E 2.3 (201.028) L4-2.3L (102.985) (1987)
Loosen and remove from housing (1) complete with locking lever (44B, 44L) and cam (48).
Locking levers (44B, 44L)
Remove from locator panel (51).
Installation Note
When assembling, only tighten the screw (52) and nut (57) lightly.
Adjust shift lock.
Shaft (18)
Withdraw, push in, check for wear. Lubricate bearing points with long-life grease.
Cover (61)
Press on after installing the floor shift mechanism and adjusting the shift lock.