Sunroof / Moonroof Cable Service and Repair | Sliding Roof | Page 8892
5 If the cable cannot be moved in this way either, remove the cable with suitable flat nosed pliers by means of clockwise turning and simultaneous
pulling.
6 Do not apply too great a force as this could unwind the strands of the cable and jam in the tube. The electric drive gearing must be dismantled in this
case See: Sunroof / Moonroof Motor/Service and Repair
7 If the cable can still not be removed after dismantling the drive gearing, it is a sign that it has jammed inside the tube which has to be removed as well
in this case. See: Sunroof / Moonroof Cable Housing/Service and Repair
Installation:
8 Thoroughly coat the spiral at the end of the new cable with MB sliding paste part no. 001 989 14 51 and carefully insert in the tube.