190E 2.6 (201.029) L6-2.6L (103.942) (1987)
Plastic Cap
11. Take off plastic cap (605) on rear of oil sump. Unscrew bolts (606).
Retaining Lock
12. Attach retaining lock 601 589 02 40 00 with both bolts (606).
Note: Pins of the retaining lock must engage into the ring gear teeth.
Harmonic Balancer
13. Unscrew bolts (602). Take off belt pulley (291) and vibration damper (292).
Installation Note: The vibration damper (292) is located with a fit pin (293). Install bolts (602) with washers, tightening torque 23 Nm.