190E 2.6 (201.029) L6-2.6L (103.942) (1987)
/l6-2.6l_(103.942)/Page-2029005.png)
18
Insert guide element 116 589 05 63 00 over shaft onto head section of refrigerant compressor.
19
Pull off assembly group using puller 000 589 88 33 00.
20
Bend back locks on hexagon-head bolts and remove the 6 bolts (8) with locks.
21
Take pulley from clutch body and remove solenoid coil from pulley.
NOTE: If the bearing (6) of the clutch body (3) must be renewed, perform steps 22 to 24.
Removing bearing
