190E 2.6 (201.029) L6-2.6L (103.942) (1987)
13
Flange frame (69) to evaporator housing and clip in place with clamps (arrows).
14
Insert temperature sensor (B10/6) as far as possible into guide tube.
15
Fit lower section of housing (67) with screws (arrows).
16
Install blower motor See: Blower Motor/Service and Repair
17 Remove closing cap (80a) of new evaporator from evaporator pipes by unscrewing both screws (arrows).
18 Install expansion valve See: Expansion Valve/Service and Repair
19 Renew receiver dehydrator See: Receiver Dryer/Service and Repair
20 Fit bulkhead (48) and fasten with screws (arrows).
21 Install cover on air inlet See: Service and Repair
22 Evacuate air conditioning system and refill; check function and check for leaks See: Testing and Inspection