190E 2.6 (201.029) L6-2.6L (103.942) (1987)
Air Bag Control Module: Removal and Replacement
Commercially Available Tools:
Special Tools
Ratchet (1/4")
Item No.415
Supplier: Eduard Wille GmbH
Connector (1/4")
Item No.412
Supplier: Postfach 12 01 03 D-5600 Wuppertal 12
1st Version:
NOTE: The 2nd version differs in the
-
modified routing of the cables of the control unit under the heater box to the right as far as the passenger's footwell.
-
modified location of the red 10-pin plug connection from the foot rest to the plate located under the foot rest.
Removing:
1. Turn ignition key to position "0", disconnect battery negative terminal and cover.
2. Remove floor mat in passenger's footwell.
3. Unscrew bolt (arrow) on foot rest and disconnect foot rest.
4. Pull off red 10-pin plug connection of control unit on foot rest.