190E 2.6 (201.029) L6-2.6L (103.942) (1987)
Throttle Valve Cable/Linkage: Adjustments
ADJUSTMENT FOR CONTROL PRESSURE CABLE
Note: Only the basic adjustment facilities are shown. The peripheral parts of the individual engine variants can differ.
Condition for adjustment: Throttle control must be adjusted accurately.
(a) Engines With Ball Head Version
Detach control pressure cable. Push back ball socket (19) (direction of arrow), then pull forward again until a slight resistance is felt. It should now
be possible to press the ball socket (19) onto the ball head free of tension; re-position adjusting screw (15), if necessary.
(b) Engines With Pointer Version
Detach control pressure cable. Screw in adjusting screw (15) of control pressure cable (98) until the tips of the pointers (arrow) are facing each
other.