190E 2.6 (201.029) L6-2.6L (103.942) (1987)
Seals and Gaskets: Service and Repair
Rear Axle Center Assembly (185mm Diameter)
Replacement of radial sealing ring on connecting flange of rear axle shaft
Preceding work: Remove, install rear axle center assembly. Refer to Differential Assembly, Service and Repair, Removal & Installation of Rear Axle
Center Assembly See: Service and Repair
Note:
For installation survey of individual rear axle center assemblies, refer to rear axle center assembly with 168 mm, 185 mm and 210 mm dia.
crown wheel.
Note:
A leaking radial sealing ring can only be replaced when the rear axle center assembly is removed. Thoroughly clean rear axle housing in
the area of the bearing cap, so that no dirt can enter the rear axle housing.
B. Rear axle center assembly with 185 mm dia. crown wheel
A.
Rear axle closing plate - model 201
B.
Rear axle closing plate - model 124
Special tools