190E 2.6 (201.029) L6-2.6L (103.942) (1987)
Wheel Hub: Service and Repair
Dust Cover, Wheel Hub
Dust Cover
Dust Sealing Ring Installed
NOTE: Mercedes recommends installing an extra dust seal for the wheel bearing for vehicles driven on bad roads. The dust sealing ring 124 997
12 40 (8b) in the form of a slinger ring is installed on the spider ring of the rear axle shaft (37a).
INSTALLATION
-
Remove brake caliper.
-
Insert dust seal (8b) between parking brake cable switch and wheel carrier at one end (arrow).
-
Position dust sealing ring around circumference of rear axle shaft.