260E (124.026) L6-2.6L (103.940) (1988)
/l6-2.6l_(103.940)/Page-2387003.png)
16. Mark holes for valve on side member under rear seat at the left and drill to 3.5 mm dia.
-
Y 24/2 Valve for unlocking headrest with cutout delay
17. Fasten valve with 2 screws BZ 4.2 x 9.5.
-
7 Supplementary harness
-
X 30 SA-connector block
18. Connect 5-pole connector of supplementary harness to a free layout point of SA-connector block.
