300CD (123.153) L5-3.0L DSL Turbo (617.952) (1982)
/l5-3.0l_dsl_turbo_(617.952)/Page-267002.png)
Layout with piston vacuum pump
94 Locking screw
95 Screw M 10 x 45
97 Washer
98 Injection timer
99 Screw M 6 x 12
100 Snap ring B 6
101 Lock washer
102 Bearing bushing front
103 Woodruff key
104 Intermediate sprocket shaft
105 Bearing bushing rear
109 Bearing bushing
On engines with piston vacuum pump, screw (95) is not hollow.
Do not mix up screws (95).
A Intermediate sprocket shaft 1st version
B Intermediate sprocket shaft 2nd version
A Rear bearing bushing 1st version
B Rear bearing bushing 2nd version
On engine 617.950 since August 1978, and on engines 617.951/952 since start of series, the intermediate sprocket shaft (B) and the rear bearing bushing
(B) of engines 615, 616 and 617.912 are installed for reasons of standardization.
These parts can also be installed on engines 617.950 manufactured at an earlier date.
