300CD (123.153) L5-3.0L DSL Turbo (617.952) (1982)
Connecting Rod: Specifications
Center of Big End Bearing Bore to Center of Small End Bushing Bore
148.95 - 149.06 mm
Width of Connecting Rod at Big End Bearing Bore
31.84 - 31.88 mm
Width of Connecting Rod at Small End Bushing Bore
27.90 - 28.10 mm
Basic Bore for Big End Shell Bearings
55.60 - 55.62 mm
Basic Bore for Small End Bushing
Normal Size
31.000 - 31.025 mm
Repair Size
31.500 - 31.525 mm
Small End Bushing Outer Diameter
Normal Size
31.060 - 31.100 mm
Repair Size
31.560 - 31.600 mm
Small End Bushing Inner Diameter
28.018 -28.024 mm
Peak to Valley Height of Small End Bushing Inside
0.004 mm
Permissible Twist of Big End Bearing Bore to Small End Bushing Bore, Relative to Length of 100 mm
0.1 mm
Permissible Parallel Misalignment of Big End Bearing Bore Axis to Small End Bushing Bore Axis, Relative
0.045 mm
to Length of 100 mm
Permissible Difference in Weight Between Any Two Con-Rod Assemblies within One Engine
5 g