300CD (123.153) L5-3.0L DSL Turbo (617.952) (1982)
16
Repeat steps 12-14.
17
Remove rigid engine mounts.
18
Install engine mount, making sure that shields are correctly located.
19
Insert and tighten engine bearer bolts at engine mount
20
Apply primary and finishing coats of paint to welded brackets.
21
Install engine shock absorber with reference to image.
4
Engine mount
8
Bracket
22
The crossmember hole where the engine stop was bolted on is now to be filled and covered with an M 12 x 95 bolt, two washers and a nut to stop
corrosion. Position retainer on bolt head.
23
If model has manual transmission and has not yet featured an engine shock absorber, first remove rear engine mount (4) with bracket.
3
Supporting plate
4
Engine mount
24
Install new engine mount as per part No.115 240