Heater Core Temperature Sensor/Switch Specifications
Heater Core Temperature Sensor / Switch: Service and Repair
Removal
1. Remove push-button control panel.
Vacuum Switchover Valves
2. Pull 2 pin plug from temperature sensor (6) and then pull temperature sensor out of heater box.
Installation
1. Place sensor into heater box and install 2 pin plug.
2. Install push-button control panel.
3. Check function of ACC. SEE Manual (Visual) Function Tests. See: Testing and Inspection/Component Tests and General
Diagnostics/Automatic Air Conditioning (Auto A/C)/Manual and Visual Function Test of Automatic Climate Control