mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Cabin Temperature Sensor / Switch > < Blower Override Switch|Service and Repair
Page 2
background image

Temperature Dial And Blower Switch Mounting Pins

2. Remove plastic cover (refer to arrows) from control unit, starting at blower switch (5), so that push-button are falling out individually. Push out

clip (64).

3. Unclip blower switch (5) from control unit and pull off.

Installation

Press blower switch (5) with clip (64) against control unit and mount plastic cover. Put back push-buttons under slight pressure with a rotating
motion (pay attention to sequence and position of symbols). Install ACC push-button control unit.

Cabin Temperature Sensor / Switch > < Blower Override Switch|Service and Repair