300CD (123.153) L5-3.0L DSL Turbo (617.952) (1982)
6. Remove rear spring with rubber mount.
020a
Tensioning screw
020b
Upper tensioning plate
020c
Lower tensoning plate
04
Socket
7. Clamp upper tensioning plate and slacken rear spring.
Installation
8. Tension rear spring at 5 coils.
9. Place rubher mount on rear spring and introduce rear spring in such a manner that the end coil is seated in impression of semitrailing arm.
10. Slacken rear spring, while paying attention to correct location of ruhber mount in frame floor and of end coil in semitrailing arm.