mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Checking Spring Struts|Page 3340 > < Checking Spring Struts
Page 2
background image

The oil film and thereby the oil outlet provided is somewhat thicker than for shock absorbers. Oil deposits inside dust guard are therefore normal.

A major leak is indicated when with the vehicle topped a number of drops will appear underneath spring strut and oil consumption of level control
system is above permissible value.

Alignment of suspension points is important for correct function of piston rod seal. Be sure to check piston rod seal in the event of leaks to see
whether alignment of suspension points is in order.

Note:

On spring struts of T-sedans, check bores on disk (5s) for contamination.

If a disk of the 1st version (A) is installed, exchange disk for 2nd version (B) with larger bores (8 mm dia.).

Rattling Noises

Check upper suspension for correct assembly, lower suspension for tight seat of fastening clip and rubber mount in housing eye or ball joint for
absence of play.

Check alignment of upper suspension point on frame floor in relation to lower suspension point on semi-trailing arm (check alignment of rear shock
absorbers).

Attention!

If the alignment of the suspension parts has not been in order, replace spring struts only if they have already been running for an extended
period at a heavily deviating alignment or if they have been clearly leaking.

Checking Spring Struts|Page 3340 > < Checking Spring Struts