300CE (124.050) L6-3.0L (103.983) (1989)
-
Unscrew bolt (7).
-
Take off cover (6).
-
Push back sliding sleeve (1).
-
Press out shift rod (2).
-
Slacken bolt (3).
-
Detach actuator (S47, S48).
-
Push away strain relief (5).
-
Disconnect electric lead and pneumatic line.
-
Move actuator (S47, S48) into installation position by pushing sliding sleeve (1) back fully and withdrawing shift rod mounting (4) as far as
detent.
-
Install actuator in reverse order.
c) Coupe and cabriolet
-
Remove door liner.
-
Unscrew bolt (7).9
-
Take off cover (6).
-
Push back sliding sleeve (1).
-
Press out shift rod (2).
-
Slacken bolt (3).
-
Detach actuator (S47, S48).
-
Push away strain relief (5).
-
Disconnect electric lead and pneumatic line.
-
Move actuator (S47, S48) into installation position by pushing sliding sleeve (1) back fully and withdrawing shift rod mounting (4) as far as
detent.
-
Install actuator in reverse order.
B. Tailgate