300CE (124.051) L6-3.0L (104.980) (1990)
Paint: Technical Service Bulletins
Paint - MS Filler Introduction
REF. NO. 98/28
TO: OUR MERCEDES-BENZ PASSENGER CAR DEALERS
DATE: June 1990
SUBJECT:
NEW PAINT MATERIAL "MS FILLER" FOR THE MB PAINT SYSTEM
ALL MODELS
An additional MB-2K MS Filler (mixing ratio 4:1 parts by volume) is
available for paint repairs to sheet metal and aluminum with shorter drying times.
Advantages
-
The MS Filler dries 40 - 50% faster, even with thicker paint layers.
-
Thickness of paint layer can be increased to a maximum of 180 microns.
-
Improved properties (e.g. adhesion and resistance to stone chips) when applied to steel and aluminum.
-
Improved corrosion protection.
-
Easier to sand.
-
The same hardener as for the 2K top coat is used, therefore no additional hardener is necessary.
Application
-
Particularly suited for minor filler repair jobs on a surface or at an edge (spot repairs).
-
After repair to an area that is sanded to bare metal (except galvanized sheet metal).