300CE (124.051) L6-3.0L (104.980) (1990)
Note: On vehicles without SA-connector block, install unit according to installation instructions 54. 1.
19. Make vacuum lines according to table.
-
2 Multiple distributor
-
8 Vacuum line rear headrests
20. Remove multiple distributor for vacuum lines in unit compartment, left, and install distributor with an additional connection instead.
-
Illustration with instrument panel lower parts installed
-
8 Vacuum line
21. Connect vacuum line 3000 mm or 2850 mm on coupe at distributor and install into legroom, left.