300CE (124.051) L6-3.0L (104.980) (1990)
Remove Poly V-belt (110), - install.
Remove Pulley (48), - install.
Unscrew Bolts (46), - screw on, remove, install power steering pump (30).
Note
On some engine variants, one or two additional bolts are to be unscrewed screwed on at the back of the pump.
After installation fill Power steering pump (30) - Bleed and Check for leaks
8-cylinder engines (single-belt drive)
8 Cylinder Engines, Single Belt Drive
SPECIAL TOOLS
Remove High voltage distributor, - install.
Loosen Bolts (48a), - tighten, 30 Nm.
Remove Poly V-belt (110), - install.
Remove Pulley (48), - install.