300CE (124.051) L6-3.0L (104.980) (1990)
/l6-3.0l_(104.980)/Page-1874002.png)
Removal, installation
1. Model 124.06 (convertible) Remove cross braces on frame floor (arrows).
Installation note: Replace self-locking polygon head bolts. Tightening torque 120 Nm. Torque wrench 001 589 66 21 00.
Caution:
The body must be jacked up without any distortion when working on the cross braces. A twin-pillar hoist can be used for this.
2. Disengage rubber rings of exhaust system (105) and support exhaust system.
Installation note: Check rubber rings for damage and replace if required.
3. Remove cover for fuel pump assembly (140) (arrows).
