300CE (124.052) L6-3.2L (104.992) (1993)
/l6-3.2l_(104.992)/Page-2327003.png)
6 Grease angular lifting arm prior to installation with MB lubricating paste, part no. 001 989 14 51, on sliding shoes and on moving parts.
NOTE: During installation, pay attention to correct seating of sliding shoes (arrows).
7 Install angular lifting arm.
8 Install sliding carrier at the same time push angular lifting arm slightly in outward direction by means of a screwdriver and tighten.
9 Install water gutter.
Shown with tilting/sliding sun roof holding angle bracket screwed off.
10 Perform basic adjustment on angular lifting arm mechanism. For this purpose, plug adjusting gauges, part no. 124 589 17 21 00 left and 124 589 18
