300CE (124.052) L6-3.2L (104.992) (1993)
/l6-3.2l_(104.992)/Page-734002.png)
10. Open cap of cooling system (release pressure).
11. Remove heating water return pipe. Hose remains connected. Seal opening at the coolant pump.
Installation Note: Replace seal between heating water return pipe (25) and coolant pump.
12. Remove front cover at top. See: Front Covers at Top, Removal and Installation
13. Mark timing chain with camshaft sprockets with colored dots.
14. Slacken bolt (211) and unscrew bolts (215, 651, 652) together with spring washers. Swivel bracket (213).
Installation Note: Apply sealant 002 989 45 20 to the front and rear of the mounting hole (arrow) of the bracket (213).
