300CE (124.052) L6-3.2L (104.992) (1993)
Timing Cover: Service and Repair
Replacing Radial Shaft Seal in Front Cover at Top
NOTE: Numbers in parentheses ( ) indicate a component or tool in the associated illustration.
1. Remove follower at camshaft.
2. Pry out seal (1)
CAUTION Use care not to damage camshaft and/or seal bore.
Seal Guide
3. Position insertion sleeve tool No. 103 589 01 14 00, or equivalent, on camshaft.
4. Coat sealing lip of seal with engine oil.
CAUTION DO NOT use grease.
Shop Made Sleeve For Pressing In Seal
5. Fit seal onto insertion sleeve, then using a suitable locally made tool (see illustration) press seal into position
NOTE Shaft seal must be positioned perpendicular to the seal for a proper seal