300CE (124.052) L6-3.2L (104.992) (1993)
/l6-3.2l_(104.992)/Page-2504001.png)
Brake Light Switch: Service and Repair
Non-Self Adjusting Type
1.
Disable airbag system, refer to MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.
2.
Disconnect switch electrical connector
3.
Remove switch locknut, then lift switch from pedal bracket.
4.
Reverse procedure to install. Adjust switch so that stop lamp will be illuminated when brake pedal is depressed .20 to .60 inch.
