300CE (124.052) L6-3.2L (104.992) (1993)
Intake Air Duct: Service and Repair
4/5
Air cleaner cross pipe
B17
Intake air in-car temperature sensor
Arrows -> Retaining clips
Remove intake air in-car temperature sensor (B17) complete with coupling:
-
To do this, compress retaining clips (arrows).
Shaped hose (arrows):
-
Pay attention to correct installed position.
Air cleaner cross pipe (4/5), pull off upwards:
-
When installing, press pins (arrows) of the air cleaner cross pipe into the rubber mounts of the valve cover as far as the stop.
-
The pins are hollow and run directly into the cross pipe.
-
The hollow pins act as an engine breather and at the same time as a means of fixing the cross pipe.