300CE (124.052) L6-3.2L (104.992) (1993)
/l6-3.2l_(104.992)/Page-1802031.png)
f) Insert piston support ring with drive shaft in the pump housing (refer to number 31).
26. ZF: Insert spacer washer (5h).
27. Insert piston spring (5d) and piston (5c) in piston support ring.
28. Place bearing shell (5g) diagonally in front of two pistons.
Carefully press remaining pistons together in the piston support ring using an Allen wrench or similar tool, while pressing the bearing shells using
the fingers.
Mount O-ring (5a).
29. Insert bearing sleeve (5f) in bearing shell (5g).
CAUTION: Insert side milled on both sides upwards.
