300CE (124.052) L6-3.2L (104.992) (1993)
Note: In the event of wear or damage to sealing lip in centering sleeve (10) of front or rear propeller shaft, the centering sleeve can be individually
replaced.
Removal and installation
1 Remove propeller shaft.
2 Unscrew hex. socket or hex. head screws with self-locking hex. nuts. The installation position is correct, if the vulcanized arrow on vibration
damper points to hump of three-legged flange (arrows). Renew self-locking hex. nuts. Tightening torque M10 = 45 Nm, M12 = 65 Nm.