300D (124.128) L5-2.5L DSL Turbo (602.962) (1991)
9.
Install female connector housing (3, Figure 4) to cut off branch (a, Figure 1) of new transmission wiring harness, and connect wires as shown in
the following table:
Model
140.042/051/057
140.032
Location 1
BK
BK/GN-RD
Location 2
----
Location 3
BK/RD
BK/RD
Location 4
----
13.
Install new transmission wiring harness and make all connections. Secure the additional connectors.
14.
Reinstall driver's footwell carpet.
15.
Test drive vehicle and check all functions of the starter lock-out/backup lamp switch, shift range B or D, as well as kickdown function.
Parts Information
In Case of Warranty
Operation:
Replace start lock-out/backup lamp switch and transmission wiring harness
Damage Code
Operation Number
Time
Model(s)
27 205 47
02-5448
2.4 hrs.
A1/A2/A3/A4
Note:
Above operation number includes all steps listed in these Work Instructions. No other operation numbers are applicable with S.I. 07.4/54.