300D (124.133) L6-3.0L DSL Turbo (603.960) (1987)
Headlamp Switch: Service and Repair
Exterior Lighting Switch
Preceding work:
Remove cover below instrument panel.
-
Ground cable at battery - disconnect, connect.
-
Exterior lamp switch control button (1) - pull off, fit on.
-
Bulb (2) - withdraw, insert.
-
Nut (3) - unscrew, screw on.
-
Exterior lamp switch (S1) - turn to the left and take out to the rear, insert from behind and turn to the right
NOTE: Ensure the retaining lugs (arrow) on the exterior lamp switch (S1) are correctly located.
-
Electrical connection (4) - pull off, plug in.