300E (124.026) L6-2.6L (103.940) (1990)
/l6-2.6l_(103.940)/Page-697003.png)
NOTE: The figure 2 is stamped on the side of the thrust piece (03).
Rivet Tool Moving Jaw
13. Insert moving jaw (02) with the figure 2 into the rivet tool as shown in the drawing.
Inserting Plate
14. Insert plate (arrow) into the moving jaw (02) (magnetic surface).
Chain Breaker
15. Fit web (arrow) onto both rollers on the link.
NOTE: Rivet heads of rivet link pins must be guided in the slot (C).
