300E (124.026) L6-2.6L (103.940) (1990)
Steering Wheel: Service and Repair
Steering Wheel without Airbag
Removal and Installation:
-
Position steering wheel (32) horizontally (front wheels in straight ahead position) and allow steering lock to engage. Insert/push adjustable steering
column in fully.
-
Remove trademark (32b) using a small screwdriver.
-
Unscrew countersunk screw (32c) and replace. On re-installation of new screw, torque to 80 Nm. To protect the steering lock and the jacket tube,
arrange for an assistant to steady the steering wheel (32).
-
If necessary, mark installed position of steering wheel in relation to steering shaft, remove steering wheel.
NOTE: When installing, align recess on the steering wheel with marking on the steering shaft (arrow) (since 01/90) or observe self-made installation
markings.
-
Reverse procedure to install.