300E (124.026) L6-2.6L (103.940) (1990)
/l6-2.6l_(103.940)/Page-1791006.png)
16. Take out cylinder rollers (16) and roller cage (14) together with pressure springs (15) Examine parts for signs of damage.
17. Take out freewheel outer race (24).
18. Examine thrust washer (18) and O-ring (20) for signs of damage and wear.
Measuring
19. Check end play of freewheel and adjust. Check play between freewheel and connection carrier (7) with a feeler gauge.
Note:
For gauging play, O-rings (12, 20) must not be installed.
20. Set play to 0.05 - 0.2 mm with shims (22), then insert O-rings (12) and (20).
21. Place shims (22) into the connection carrier (7).
22. Hold freewheel together and insert retaining ring.
