300E (124.030) L6-3.0L (103.983) (1986)
/l6-3.0l_(103.983)/Page-403005.png)
12.
Fasten left splash guard to body rail with two sheet metal screws (6), and to the lower control arm mounting bracket with one sheet screw (6,
Figure 12).
13.
Reinstall torsion bar mounts to body rail (use new bolts).
14.
Attach expandible fastening clip (4), to left and right radiator bracket (Figure 13).
15.
Engage recess of encapsulation panel to lip of splash guard (arrow, Figure 14). From below the engine compartment push the encapsulation panel
up so that the edges of the left and right splash guards and panel snap together.
