300E (124.030) L6-3.0L (103.983) (1986)
/l6-3.0l_(103.983)/Page-2757002.png)
3. Take off rubber seal (arrows).
Installation:
4. Coat new rubber seal (arrows) with MB Universal Adhesive and stick onto the housing.
5. On models with air conditioner, additionally attach new rubber seal with a hose strap (arrow).
6. Move gear head into center position and introduce into bearing until the push rod is fully inserted. Correct at gear wheel if necessary by turning.
7. Press retaining ring onto wiper shaft.
8. Complete assembly in reverse order of removal.
