300E 4MATIC (124.230) L6-3.0L (103.985) (1990)
/l6-3.0l_(103.985)/Page-2723001.png)
Rear Bumper: Removal and Replacement
Removal and Installation of Rear Bumper
A. Sedan
Removal, installation:
1. Unscrew fastening nuts outside left and right.
2. Unscrew nuts on rear center piece.
3. Take out front fastening bolts on rear fender and remove bumper in rearward direction.
4. For further installation proceed in reverse order.
B. T-model
