300E 4MATIC (124.230) L6-3.0L (103.985) (1990)
Arm Rest: Technical Service Bulletins
Interior Trim - Driver's Seat Armrest Modified
TO:
OUR MERCEDES-BENZ PASSENGER
DATE:
April 1991
SUBJECT:
MODEL 124 COUPE MODIFIED DRIVE ARMREST
REF. NO.
91/47
Figure 1
Starting in September 1990, a modified driver's seat armrest has been phased-in. When the driver's seat is tilted forward, a mechanism in the seat back
frame lifts the revised armrest slightly from the horizontal position (Figure 1)
Figure 2
Note: The modified armrest, which can be identified by the protruding shaft on the mounting flange (Figure 2), can only be installed on seat back frames
equipped with the lifting mechanism.
Installation note:
To avoid damage to the lifting mechanism, the modified armrest should only be installed in the vertically latched position.