300E 4MATIC (124.230) L6-3.0L (103.985) (1990)
/l6-3.0l_(103.985)/Page-930002.png)
Moving The Fan Cowling Back Over The Fan
6. Insert an 8mm bit into the retaining screw (201). Turn the belt pulley until the retaining slots line up on the fan bearing bracket and the belt pulley.
8mm Bit Into The Fan Retaining Screw
Rotating The Fan To Line Up The Retaining Slots
7. Insert counter-holder (Special Service Tool #103 589 00 40 00) into the retaining slot of the fan bearing bracket and the mounting hole of the belt
pulley.
