300E 4MATIC (124.230) L6-3.0L (103.985) (1990)
Procedure
1.
Place engine hood in vertical position.
2.
Disconnect and cover battery negative terminal.
Figure 1
3.
Loosen both nuts (2, Figure 1) and remove connection cables from pre-resistor (1).
4.
Loosen nuts (3) frail holder.
5.
Remove pre-resistor (1).
Figure 2
6.
Insert new pre-resistor (1, Figure 2).
7.
Fit new cover (4) over pre-resistor and secure with 2 nuts (3).
8.
For further installation proceed in reverse order.
Parts Information
Part Name
Part
Pre-resistor
000 158 32 45
Cover
126 545 03 46
Time Allowance
Pre-resistor for auxiliary fan, replace
0.3 hrs.
(with protective cover installation)
Damage Code