Mercedes Benz Workshop Service and Repair Manuals

Model 124

1.

Partially remove the component compartment seal.

2.

Remove lower windshield molding.

3.

Remove component compartment cover.

4.

Remove component cover from cross-member, beneath windshield.

5.

Install modified component cover onto cross-member, beneath windshield.

6.

Install lower windshield molding.

7.

Press seal back into place.

8.

Install modified component compartment cover.

Model 201

1.

Remove component compartment cover (Figure 3).

2.

Remove existing rubber seal (approx. 8 in./200 mm in length) from right rear section of the engine hood.

3.

Install modified component compartment cover.

Parts Information

Time Allowance

Damage Code