mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

A/C Input|Page 4812 > < A/C Input|Page 4810
Page 1
background image

Vehicle Speed Sensor: Service and Repair

1.

Disconnect the negative battery terminal.

Disconnecting The 10-point Triggering Unit Plug

2.

Disconnect the red 10-point plug connection of the triggering unit on the foot support.

Removing The Torx Screws (66) From The Generator Carrier

3.

Remove both of the torx screws (66) from the generator carrier so that the generator carrier is released from the contact bridges.

Removing The Airbag Unit (51) Complete From The Steering Wheel

4.

Lift the airbag unit (51) off the steering wheel enough to access the electrical connections.

A/C Input|Page 4812 > < A/C Input|Page 4810