300E 4MATIC (124.230) L6-3.0L (103.985) (1990)
/l6-3.0l_(103.985)/Page-2298005.png)
12 On engines 116, 117, remove ignition distributor, additionally loosen tensioning roller on engines with air-conditioning or automatic climate
control and push in downward direction. To remove suction line (A), loosen holder on cylinder crankcase.
Note: On vehicles with diesel engine 615, 616 and 617, the location of the pressure oil pump on cylinder head, as well as the suction and pressure
line connection on pressure oil pump have been changed since February 1979 by displacing the fluid reservoir from the left to the right engine
compartment.
The HP expanding hose with steel line to pressure oil pump installed from February to end of May 1979 is no longer available as a spare part.
In the event of repairs, these vehicles should therefore be converted to the third version.
Installation
13 Check driver and coupling members for pump drive.
14 Mount new gasket (1d), introduce pump, making sure that driver components are correctly meshing. Tighten hex. socket screws uniformly to 11
Nm.
