mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
Rear Axle Center Assembly (168mm Diameter)|Page 6067 > < Rear Axle Center Assembly (168mm Diameter)|Page 6065

300E 4MATIC (124.230) L6-3.0L (103.985) (1990)

Page 5
background image

Installation note:  Press partially rubberized radial sealing rings (32) into standard rear axle housing with drift punch (049b) 126 589 00 15 00. Coat
sealing lip on radial sealing ring lightly with hypoid gear oil.

Press partially rubberized radial sealing rings (32) into ASR rear axle housing with drift punch (014a) 126 589 04 15 00. Coat sealing lip on radial
sealing ring lightly with hypoid gear oil.

7. Install in reverse sequence.

Rear Axle Center Assembly (168mm Diameter)|Page 6067 > < Rear Axle Center Assembly (168mm Diameter)|Page 6065