300E 4MATIC (124.230) L6-3.0L (103.985) (1990)
/l6-3.0l_(103.985)/Page-1820006.png)
Installation note
Ensure correct seating of the circlip in the wheel carrier.
7
Wheel carrier
8
Two-row angular-contact ball bearing
08a
Hexagon bolt with collar nut
08b
Extractor/pulling-in sleeve
08c
Thrust washer (small, 45 mm dia.)
08e
Thrust bearing
8. Using extractor/pulling-in equipment (08a, 08b, 08c and 08e) 124 589 0543 00, pull two-row angular-contact ball bearing (8) out of wheel carrier
(7) and remove.
Installation note
Using extractor/pulling-in equipment 124 589 05 43 00 (08a, 08b, 08d and 08e), pull two-row angular-contact ball bearing (8) into wheel carrier (7)
until this contacts the edge (arrow).
