300SD (126.120) L5-3.0L DSL Turbo (617.951) (1982)
/l5-3.0l_dsl_turbo_(617.951)/Page-615003.png)
Assembly
4
Press in new compact bearing flush with bearing housing by means of a tube positioned against outer race.
Do not press against coolant pump shaft.
5
Coat mounting bore of sliding ring seal in bearing housing slightly with sealing compound (Part No. 001 989 25 20).
Press-in or knock-in sliding ring seal with pressing-in sleeve.
Attention!
Support only against bearing housing and not against coolant pump shaft.
