300SD (126.120) L5-3.0L DSL Turbo (617.951) (1982)
NOTE: When the minimum necked-down dia. of 8.0 mm has been attained or is less than 7.2 mm, renew connecting rod bolt.
Knock-out connecting rod bolt only for replacement.
Shop Made Tool
Hole spacing a = 67 mm
Bore
b = 11 mm
Replacement
2
Knock-out connecting rod bolts.
3
Press new connecting rod bolts into connecting rod at approx. 45000 N or knock-in with a hammer and mandrel.
When knocking-in or pressing-in connecting rod bolts, place connecting rod on a ground steel plate.